Gypsol is a general-purpose, free-flowing, self-compacting anhydrite screed binder.
BBA Certificate, EPD available
Assured high strength with a minimum Ca C25 – F4
Fast drying of 28 days natural drying* and 13 days forced drying*
No curing agents required
No reinforcement nor fibres required
Reduced corosion to screeding equipment
We manufacture Gypsol binder for anhydrite flowing screeds in quality-assured Readymix facilities throughout the UK. Gypsol screeds are also available in specific locations from volumetric on-site mixing systems.
What we do
Gypsol screed is made from our high-quality Gypsol anhydrite binder, specially selected sands, and clean water. Therefore, it offers the user a simple and effective floor-screeding solution for floating, unbonded, or fully bonded applications where you use a subsequent floor covering.
Benefits of using Gypsol
Using Gypsol Classic will benefit your screed floor because of:
*Independently tested and based on 50mm depth at 20˚C and 60% RH. Complete test data is available on request.
LKAB Minerals Gypsol Classic screed is available from all Readymix and volumetric screed producers who stock Gypsol Binder.
LKAB Minerals recently had an EPD completed. Click below to see the results.
Environmental Product Declaration
Completed in accordance with ISO 14025 and EN 15804:2012+A2:2019, the EPD report found the following total of kg of CO2 per tonne:
• Gypsol binder: 91.7
• Gypsol Complete binder: 108
The below screeds are available from ready-mix companies.
|Gypsol Classic||Our general-purpose screeding system. The most commonly used material in our range.|
|Gypsol Rapide||A self-compacting, self-smoothing, fast-drying floor screed using Gypsol Complete binder.|
(High Thermal Conductivity)
|A screed made for use with underfloor heating and cooling systems.|
|Gypsol TS-15||An ultra-thin screed for bonded and un-bonded applications at a minimum depth of 15mm.|
|Gypsol TS-20||thin screed suitable for bonded and un-bonded applications down to a 20mm minimum depth.|
|Gypsol TimBRE||Specially formulated and tested for use in timber frames and over timber-supported floors, including acoustic conditions.|
|Gypsol XS||Extra strength material for use in heavy-duty applications, where loading is likely to be higher than normal.|
|Gypsol Summit||Particularly fit for screeds pumped over very long distances or high buildings of 10 stories and above.|
|Gypsol Modular||Designed for use in modular construction to allow early movement of units, also for a lightweight steel frame and Lewis Decking.|
Our customers use industrial minerals to improve constructions, increase safety and reduce costs.